|
Model 810
10" Capacity Wood Chipper
|
Specifications |
| Towing
Hitch |
2
5/16" ball, 3" pintle, adjustable for height. |
| Tongue |
3" x
4" x 1/4" wall, rectangular steel tube. Bolt on tongue
bracket is 1/2" steel plate with 1/4" gussets welded for extra
support. |
| Tongue
Jack |
2,000 lb.
capacity, adjustable for height with top wind swivel snap ring
mount. Secures in either an up or down position. |
| Trailer |
2" x
4" rectangular tubing with support gussets and continuous welds for
strength. |
| Fenders |
Extra
heavy duty 1/4" diamond plate fenders with safety light guards. |
| Lights |
License
plate, stop, directional and safety. D.O.T. approved. |
| Safety
Chains |
Two (2)
2/3" links x 36" length with lip hooks. Meets SAE safety
standards. |
| Axle |
6,000 lb
Torflex Axle, features an independent suspension, cushioned with rubber,
providing a smooth, quiet ride with no transfer of road shock from one
wheel to the other. |
| Tires |
Two (2)
ST225/75R15, 8 ply, 28.10" dia. Max load 2540 lbs. each. High
speed, highway rib mounted on a 6 bolt white spooked wheel. |
| Paint |
Orange,
polyester powder coated paint offers excellent weatherability and
protection against ultra violet discoloration. |
| Fuel
Tank |
25 Gal. 19
1/4" x 12" x 24", with lockable filler cap and shock
mounted with rubber cushions on all mounting brackets. |
| Hydraulic
Tank |
Triangular.
16 3/4 gal. 24" high - 18" sides (1,881 sq. in.). |
| Infeed
chute |
Extra wide
profile, 1/4" thick steel plate sides, 57" x 33".
Control bar positioned at top and side of infeed tray to control movement
of material (forward/neutral/reverse). |
| Chipper
Disc |
2"
thick x 32" diameter disc, machined and balanced, mounted on a
4-1/2" diameter steel hub with exhaust blades. (Approximately
600 lbs.) |
| Chipper
Bearings |
3" -
4 bolt flange bearing. Self centering, heavy duty cast iron type. |
| Chipper
Blades |
Four (4) 7
1/4" x 4" x 1/2", double sided, reversible, bolted, and set
into 2 knife pockets. |
| Infeed
Opening |
10" x
18" opening at the infeed roll. |
| Bed
Knives |
Two (2) 1
- Horizontal, 1" thick x 7" x 18" and 1 - Vertical, 1"
thick x 8-3/8" x 9". Both knives are reversible and
adjustable. |
| Hydraulic
Feed System |
Heavy duty
1200 lb., weighted box type feed system. Feed rate, 0-125' per
minute. Hydraulic hoses - 2,500 lbs., P.S.I. working, 10,000 lbs.
P.S.I. burst, including hydraulic pump, control valve with relief valve,
hydraulic motor and 16-3/4 gal. hydraulic oil reservoir. |
| Hydraulic
Feed |
Large
21" diameter x 18" long, 600 lb., weighted feed roll with 14
rows of 1-1/4" long, replaceable knives, and scraper bars to prevent
wrapping. Powered by a hydraulic motor. Hydraulic drive to
feed roll is done through # 80 chain and sprockets for increased torque
and longer hydraulic motor life. |
| Battery |
12 V
automotive style, 900 cold cranks with lockable box. |
| Tool
Box |
Lockable
tool box. 7" W x 16-3/4" L x 6" H. |
| Discharge |
360º
swivel chute with adjustable chip deflector. No tools required for
adjustment. (270º stop available, if required) |
| Overall
Dimensions |
Total
length, 171". Width - 80-1/2". Height to top of discharge -
93". Weight - 4,600 lbs. (approximately) |
|
Specifications & options subject to
change without notice. |
Back to 810
Home, Products,
On The Road, Dealer
Locator, What's New?,
Testimonials, Used
Equipment, Contact Us
105 School House Road, Cheshire, CT
06410
203-271-1682, 1-800-872-5726, 203-271-2596 (Fax)
|
