Model 86 Series
6" x 12" Wood Chipper
|
Specifications |
|
| Towing Hitch | Adjustable height hitch. 2" ball, 2-5/16" ball, or 3" pintle couplers available. |
| Tongue | 2" x 3" x 1/4" wall, rectangular steel tube. Bolt on tongue bracket is 1/2" steel plate bracket with 1/4" gussets. |
| Tongue Jack | Top wind swivel snap ring mount jack. 1,000 lb. lift capacity. Lift-10". Secures in either an up or down positions |
| Trailer | 3" x 2" x 1/4" wall rectangular steel tube, continuous welds for strength and gusseted where needed. |
| Fenders | 1/4" heavy duty diamond plate fenders with safety light guards. |
| Lights | Stop, directional and safety. Enclosed |
| Safety Chains | 3/16" diameter x 48" long, with 3/8" diameter hooks. Meets SAE safety standards. |
| Axle | 2,400 lb. Torflex Axle, features an independent suspension, cushioned with rubber, providing a smooth, quiet ride with no transfer of road shock from one wheel to the other. |
| Tires | (2) F-78-14. Load range C/6 ply rating. High speed, highway rib mounted on a five bolt white spoked wheel. |
| Paint | Orange, polyester powder coated paint provides excellent outdoor weatherability and offers protection against ultra violet discoloration. |
| Fuel Tank | 10 1/4" x 13" x 22" steel tank. 13 gallon capacity with lockable filler cap, dip stick & drain plug. |
| Hydraulic Tank | 8 1/4" x 10 3/8" x 10 1/4" steel tank. 4 gallon capacity, with lockable filler cap, dip stick & drain plug. |
| Infeed Chute | 40" wide x 23" high, (920 sq. in.) 61" from edge to pinch point, 19 3/4" from ground to tray. Fold down infeed pan with sides. Control bar positioned at top of chute to control movement of the feed wheel - forward/neutral/reverse. |
| Chipper Disc | 1" thick x 26" diameter disc mounted on a 2" diameter steel shaft with four exhaust blades. (Approximately 200 lbs.) |
| Blades | Two sets of chip blades, 2 blades per set. Each blade is 5" long x 4" wide x 1/2" thick, oil hardened steel, and double sided. |
| Chipper Blade Opening | 6" X 12" opening at the infeed roll. |
| Bed Knives | (2) One horizontal and one vertical, Both are adjustable and 1" thick steel. |
| Hydraulic Feed System | Sunstrand BDP10 piston type hydrostatic pump with variable speed control. Maximum feed rate, 94' per minute. Hydraulic hoses - 2,500 lbs., P.S.I. working, 10,000 lbs. P.S.I. burst. |
| Hydraulic Feed | One 7" diameter x 12" long feed roll, with cutter blades. Blades for soft or hard wood, powered by a hydraulic motor. |
| Battery | 12 V automotive style, 350 cold cranks with lockable box. |
| Tool Box | Lockable tool box large enough to hold a grease gun and other necessary tools. |
| Discharge | 360º swivel chute with adjustable chip deflector. NO tools necessary for adjustment. |
| Overall Dimensions | Length with feed tray closed - 109". Width - 78". Height to top of discharge - 90". Weight - 2,120 lbs. (approximately) |
|
Specifications subject to change without notice. |
|