|
4" x 8" 3-Point Chipper
3-Point Hitch
Model 824
|
|
The
Model 824 connects easily to any Category I, 3-point
tractor, requiring only 16 HP and 540 R.P.M. at the P.T.O.
The 824 comes with its own hydraulic system and needs no
oil from the tractor. It has four adjustable legs
which can be raised for transport through the woods, or
lowered for storage and operation. All welds are
continuous for extra strength and durability. The
360º swivel exhaust chute and exhaust flap are quickly
and easily adjusted to direct the exhaust. |
No
Ordinary 4" Chipper!
|
|
The
extra wide infeed hopper allows the bushy branches to be
pulled in and chipped. This lessens the amount of
pruning that needs to be done. Control handle has a
slow speed, fast speed, neutral and reverse to control
chip size and feed speed, and is easily accessible from
either side of the infeed. |
|
|
Left
- The chipper disc is 18-7/8" in diameter and
3/4" thick, with six exhaust paddles, welded and
gusseted for extra strength. There are 2 chip
blades, 1/2" thick x 7-1/4" long x 4" wide
and they are double sided! |
|
Left
- The 824 has only one options, feed sensing.
Feed sensing counts the impeller R.P.M. and if the tractor
is getting loaded up due to a combination of large long
logs and not enough horsepower, the Feed Sensing will stip
the feed roll and allow the tractor to catch up. |
LIST
OF SPECIFICATIONS
Home, Products,
On The Road, Dealer
Locator, What's New?,
Testimonials, Used
Equipment, Contact Us
105 School House Road, Cheshire, CT
06410
203-271-1682, 1-800-872-5726, 203-271-2596 (Fax)
|
