|
6"
x 12" Wood Chipper
3-Point Hitch
Model 826
 |
The
Model 826 has an extra wide infeed hopper to accommodate
brushy material, and an extra long infeed tray that folds up for ease of storage and
transportation. The infeed opening at the chipper
disc is 6" high by 12" wide. The 826
requires only 25hp at the PTO. Both the 360º swivel
chute and the adjustable chip deflector are easily adjusted
without tools. The heavy
duty rectangular steel tubing frame has
adjustable legs to lower the infeed pan. The
control handle is easily accessed from either side and has
a slow speed, high speed, neutral and reverse. |
Extra
Wide 12" Infeed Opening!
|
Click to enlarge.
|
Left
- Pictured is the Salsco 826 Chipper with a skid steer
option. This option allows the unit to attach to and
run off a skid steer instead of a tractor. |
|
Left
- The infeed opening on the 826 is 6" high x 12"
wide. This extra wide opening accommodates brushy
material and reduces the pruning and trimming that is
needed. |
|
The feed sensing option counts the
impeller R.P.M. and recognizes when the tractor is getting
loaded up, due to a combination of large, long logs, and not
enough horsepower. If this happens the Feed Sensing
will stop the feel roll and allow the tractor to catch up.
|
The Chipper disc is
26" in diameter x 1" thick steel. It has 6
welded and gusseted fan blades to exhaust chips, four
reversible chip blades, each 1/2" thick x 4" wide
x 5" long, and extra wide chip pockets to decrease
clogging. The chipper disc is easily accessible for
removal of chip blades, for replacement or for sharpening.
|
LIST
OF SPECIFICATIONS
Home, Products,
On The Road, Dealer
Locator, What's New?,
Testimonials, Used
Equipment, Contact Us
105 School House Road, Cheshire, CT
06410
203-271-1682, 1-800-872-5726, 203-271-2596 (Fax)
|
