810 HYDRAULIC FEED CHIPPER

Model 810 is Built Tough and Will Provide the User With Many Years of Service.

MODEL 810 - 10" CAPACITY CHIPPER
ENGINE DRIVEN, HYDRAULIC FEED

Model 810 Chipper is a single feed roll unit (Dual Feed Rolls are available as an option) with an extra wide 18" x 10" high opening at the feed roll. Piles of brush, limbs and branches up to 10" round wood can be fed into this unit quickly and efficiently. Performance and durability is the trademark of all our chippers, and the 810 is proof of this philosophy.

Drain plugs on all tanks, diamond plate fenders with light enclosures, 360º exhaust chute, lockable tanks and engine enclosures, are just some of the standard features of this unit.

Safety Latch on the impeller, Safety Apron welded to the bottom of the infeed tray, Emergency Stop Buttons on either side of the infeed tray, Safety Bar mounted on the outer edge of the infeed which is accessible from both sides as well as the top of the infeed and SSS Salsco Safety Shield are all safety features that are standard on the Model 810.

OPTIONS INCLUDE: (Click on the literature & specifications link below to view all available options)

The SSS Salsco Safety Shield is a safety system that vastly improves wood chipping safety, proactively and effectively preventing wood chipper injury by shutting down the chipper’s infeed system when an operator enters a defined hazard zone.

Click here to view SSS Salsco Safety Shield Demonstration and Features videos.

Speed Sensing monitors the impeller R.P.M., and should the R.P.M. drop to a certain R.P.M., the infeed will stop and wait for the R.P.M.of the impeller to come up to full operating R.P.M., and then it will start feeding in the material. An invaluable tool!

Hydraulic Feed Roll Lift is an excellent option when processing large branches. Pull the lever on the infeed and the infeed roll is raised so that the branch can be loaded directly under the infeed roll. Lower the lever on the branch and the feed roll will pull the branch in.