826PTO, HYDRAULIC FEED CHIPPER
26" Diameter, 1" Thick Impeller with (6) Welded and Gusseted Fan Blades
MODEL 826PTO CHIPPER - 6" CAPACITY
MINIMUM 25HP REQUIRED AT THE PTO
The 826PTO has a 6” High x 12” Extra Wide Infeed Opening to accommodate brushy material, and an extra long infeed tray for safety. Saw mill operators can easily chip up to 12" wide slabs, and rid their property of those unsightly piles of slab wood that accumulate.The infeed tray folds up for ease of storage and transportation.
Minimum Horsepower is 25HP at the PTO and Only Requires 540 R.P.M. Hydraulics are Self-Contained; no remote connections to the tractor are needed. The Control Handle is Easily Accessed From Either Side and has a Slow Speed, High Speed, Neutral and Reverse.
The 200 lb. Impeller is 26” in Diameter and 1” Thick Steel. It has six welded and gusseted exhaust blades to exhaust chips, and four 1/2” double-sided chip blades. Extra wide chip pockets decrease clogging by allowing for better air flow and chip exhaust.
As with all Salsco equipment, the 826PTO is built to last and has proven itself for well over 20 years of service. The first units built are still out there and running strong.
OPTIONS:
Speed Sensing monitors the impeller R.P.M., and should the R.P.M. drop to a certain R.P.M., the infeed will stop and wait for the R.P.M. of the impeller to come up to full operating R.P.M., and then it will start feeding in the material. An invaluable tool!
Skid Steer Adapter Plate includes all necessary hoses, hydraulic pump and a hydraulic motor to mount the Model 826PTO to a skid steer. The skid steer can be either high or low flow.
Click here to view the 826PTO chipper in action, with the Skid Steer Plate Option!
TESTIMONIALS:
"I've owned two of these. They have both performed exceptionally well with no break downs at all." John, B & K Tree Farm, Fort Kent, ME
"I was looking for a versatile PTO Chipper. I compared the Salsco 826 to Patu and Morbark - Salsco won! I called Union Farm Equipment the Salsco Dealer in Maine, and I called Salsco, and all my questions were answered. I was prompted to buy the Salsco because it is American made, parts availability and Union Farm Equipment. The size of the brush I chip fits into the chipper easily and the vertical layout of the infeed chute was important too. The 826 exceeds my expectation; very little maintenance except greasing. Best piece of gear I have, use it with a Massey 270." Thanks. Joe, Braintree, MA
Click here to read more testimonials.
ASSOCIATED FILES:
 "826PTO, HYDRAULIC FEED CHIPPER")
 "826PTO, HYDRAULIC FEED CHIPPER")
 "826PTO, HYDRAULIC FEED CHIPPER")
 "826PTO, HYDRAULIC FEED CHIPPER")
 "826PTO, HYDRAULIC FEED CHIPPER")
 "826PTO, HYDRAULIC FEED CHIPPER")
